Windows Users:
The NL-SWNDK will enumerate on a Windows host PC as three COM ports. These COM
ports will be named something like "JLink CDC UART Port".
The image below depicts the enumeration for the NL-SWNDK on a Windows 10 PC, as
seen in the Tera Term "New Connection" menu:
The Segger J-Link drivers for the development kit should automatically install when the
development kit is plugged into the test PC.
If this is not the case, please refer to the following link. Download and install the J-Link
Software and Documentation Pack:
https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack
The COM port that is connected to the modem's AT command parser serial port
(UART1) may vary from PC to PC. Using Tera Term, test out each COM port until the AT
interface is found.
PN 1002398 rev 1
© NimbeLink Corp. 2020. All rights reserved.
12
