Nilox 16NXRW1430001, Руководство пользователя

Страница: 27 / 82

26
WAN S
ERVICE
(IP
O
A)
This section describes the steps for adding the IPoA WAN service.

Step0 Choose Advanced Setup > Layer2 Interface > ATM Interface . In this page, you can add or remove to
configure DSL ATM Interfaces. Click Add to add ATM Interface and the following page appears. DSL Link Type:
IPoA and select the encapsulation mode to be LLC/SNAP-Routing (according to the uplink equipment). Click
Apply/Save to save the configuration, and return the following page.

Step1 Choose Advanced Setup > WAN Service , and the following page appears. Click Add. In the Wide Area
Network (WAN) Service Setup page, click the Add button to display the following page. (At first, you must add a proper
ATM interface for this WAN service).

Step 2 In this page, you can select a ATM Interface for the WAN service. After selecting the ATM interface, click Next
to display the following page.

Step 3 In this page, Click Next .