![background image](http://html1.mh-extra.com/html/nilox/16nx071900001/16nx071900001_user-manual_1694227024.webp)
16NX071900001
Cable/DSL Router User Guide
19
by ISP
and enter the IP in dotted-decimal notation, which your ISP provided.
¾
Detect Online Interval -
The default value is 0, you can input the value between 0
and 120. The router will detect Access Concentrator online at every interval between
the time. If the value is 0,
it
means the Router does not detect.
¾
Primary DNS & Secondary DNS -
If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select
Use the following DNS
servers
and enter the address in dotted-decimal notation of your ISP’s primary DNS
server. If a secondary DNS server address is available, enter it as well.
4. 802.1X + Dynamic IP
If you are provided
802.1x + Dynamic IP
for ISP connection, you should select
“802.1x + Dynamic IP” and enter the user name and password provided by ISP
(shown in Figure 4-8).
Figure 4-8
¾
User Name
& Password -
Enter the user name and password for 802.1x
authentication provided by your ISP
¾
Host Name
-
Enter the host name.
¾
MTU Size
-
The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is
rarely required, and should not be done unless you are sure it is necessary for your
ISP connection.
¾
Primary DNS & Secondary DNS
-
If your ISP gives you one or two DNS addresses,
select
Use These DNS Servers
and enter the primary and secondary addresses
into the correct fields. Otherwise, the DNS servers will be assigned dynamically from
ISP.