![background image](http://html1.mh-extra.com/html/nilox/16nx071900001/16nx071900001_user-manual_1694227029.webp)
16NX071900001
Cable/DSL Router User Guide
24
4.3.3 MAC Clone
Choose menu “
Network
→
MAC Clone
”, you can configure the MAC address of the WAN
on the screen below (shown in Figure 4-13).
Some ISPs require that you register the MAC address of your adapter, which is
connected to your cable, DSL modem or Ethernet during installation. You do not
generally need to change anything here.
Figure 4-13
¾
WAN MAC Address -
This field displays the current MAC address of the WAN port,
which is used for the WAN port. If your ISP requires that you register the MAC
address, please enter the correct MAC address into this field. The format for the
MAC address is XX-XX-XX-XX-XX-XX (for example: 00-0A-EB-22-13-52).
¾
Your PC's MAC Address -
This field displays the MAC address of the PC that is
managing the router. If the MAC address is required, you can click the
Clone MAC
Address
button and this MAC address will fill in the “WAN MAC Address” field.
)
Note:
1) Click
Restore Factory MAC
to restore the MAC address of WAN port to the
factory default value.
2) Only the PC(s) on your LAN can use the
MAC Address Clone
feature.
3) After you finish the configuration, click the
Save
button, and the router will
prompt you to reboot.
4.4 DHCP
Choose menu “
DHCP
”, you can see the submenus under the main menu:
DHCP Settings
,
DHCP Clients List
and
Address Reservation
.
Figure 4-14
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.