ENGLISH
USER MANUAL
28
909 6752 000(3)2010-03 A
BA 551 - BA 551D - BA 551CD - BA 611D
BRUSH/PAD-HOLDER/CYLINDRICAL BRUSH DECK DISASSEMBLY/ASSEMBLY
The machine can be equipped with either the brush/pad-holder deck (18a and 18b) or the cylindrical brush deck (18c).
NOTE
When the deck is installed/removed, it may be necessary to change the squeegee too, because they must have the
same width. For correct matching of deck and squeegee, see the Squeegee Installation paragraph.
Disassembly
Drive the machine on a level
fl
oor.
1.
Remove the brushes/pad-holders according to the procedure shown in the relevant paragraph. Do not remove the cylindrical
2.
brushes.
Lower the brush/pad-holder deck by pressing the pedal (11).
3.
If equipped, remove the cotter pins (B, Fig. 12) and the gas spring (A).
4.
Disconnect the brush/pad-holder motor electrical connection (D).
5.
Disconnect the solution hose union (E).
6.
Remove the screws (C), then remove the brush/pad-holder deck (F).
7.
Assembly
Assemble the components in the reverse order of disassembly, and note the following:
8.
When the machine is equipped with the cylindrical brush deck (18c), the gas spring (A) must not be installed.
•
F
E
C
D
B
A
B
Figure 12
S311318
909 6752 000(3)2010-03 A.indb 28
909 6752 000(3)2010-03 A.indb 28
04/03/2010 15.01.31
04/03/2010 15.01.31