English
8
Installation
•
Lift the machine out of the box.
•
Carefully place the machine on its side in
order to assemble the wheels securely.
!!
A flat surface is required which will
not scratch or damage the surfaces of the
machine.
•
Diagram D
– Casters with No Brake x 2. Remove bolts from the machine and
position into place towards back of the machine. Tighten securely ensuring no
movement on the brackets.
•
Diagram D
– Casters with Brake x 2. Remove bolts from the machine and position
into place towards front of the machine. Tighten securely ensuring no movement on
the brackets.
•
Once all the wheels are fully assembled, resume the machine to its upright position.
•
Place Tubular Handle
(Diagram D)
in position on the back of the machine and secure
using the 4 x Plastic Wing Nuts
(Diagram D).
!!
Do not screw them all the way in at this point.
•
Place Wire Basket
(Diagram D)
over the Wing Nuts and tighten up to secure.
•
Check all accessories are present in the box as shown in
Diagram C & D.
•
This is an electrical product – Do not use in wet weather or allow the machine to get wet.
•
Do not discharge steam towards people, danger of scolding. Or towards equipment containing
electrical components
•
Never allow children to play with this appliance.
•
Do not use the machine for other purposes that it was built for.
•
Please remember that the steam cleaner operates at temperatures in excess of 150
°
C. Never
use it on objects, which cannot resist the temperature (delicate materials, fabrics, plastics,
wood etc). Where any doubt exists check carefully on a part of the material where minor
marks will not matter.
•
Do not operate the machine or carry out any maintenance out on it
Unless you are trained and authorised to do so
Unless you have read and thoroughly understand this instruction manual.
Warnings
………………………………………………...
This machine has been designed with your safety in mind; however it is important that you
observe the following points for safe operation during the operating procedure
