background image

 71

Poseidon 2

Original Instructions

6  After using your pressure washer

6.2  Winding up of electric  

cable and high pressure  
hose 

up carefully.

1. Wind up the electric cable on 

the dedicated hooks. Built-in 

clip for good holding.

  The lower hook can be 

turned to release the electric 
cable. 

2. The high pressure washer 

comes in two models: A) with 
hook for storage of high pres-
sure hose (14) - B) with a 
hose reel (13).

6.1  Storing the washer

The machine should be sto-
red in a frost-free room!

Pump, hose and accessories 
should always be emptied of 
water prior to storing as follows:

1. Stop the machine (turn the 

start/stop switch (1) to posi-
tion “

O

” and detach water 

hose and accessory.

2. Restart the machine and 

activate the trigger. Let the 
machine run until no more 
water runs through the spray 
handle.

3. Stop the machine and un-

plug. Wind the electric cable 
round the hooks placed on 
the side of the machine.

4. Separate spray handle and 

spray lance.

5. 

Machines without hose reel:

 

Detach high pres sure hose, 
coil it up and place it on the 
hose storage.

 

Machines with hose reel:

 Coil 

the high pressure hose up on 
the hose reel.

6. Place spray handle, nozzles 

and other ac ces so ries in the 
 holders of the machine.

Should the machine by mistake 
be frozen, let it thaw and check 
it for damage.

NEVER START-UP A FROZEN 
MACHINE

.

Frost damages are not 
 covered by the  guarantee!

6.3  Storage of accessories

The standard accessories 
(spray handle, spray lance 
(A) and nozzle cleaning tool) 
can be stored on the pressure 
washer.

To avoid accidents, the electric 
cable and the high pressure 
hose should always be wound 

A

Содержание POSEIDON 2



















Отзывы: