manualshive.com logo in svg

Nilfisk-ALTO NEPTUNE 3, Оригинальное руководство пользователя, Страница: 21 / 22

Поделиться
Скачать
Nilfisk-ALTO NEPTUNE 3 Скачать руководство пользователя страница 21

21

1)

 Options / model variants

Original instructions

NEPTUNE 3

9.4 

EU Declaration of Conformity

 

EU Declaration of Conformity

Product:

High Pressure Washer

Type:

NEPTUNE 3

The design of the unit corre sponds to 
the following  pertinent  regulations:

EC Machine Directive 

2006/42/EC

EC Low-voltage Directive 

2006/95/EC

EC EMC Directive    

 2004/108/EC

EC RoHS Directive                                                      2011/65/EC
EC PED Directive                                                            97/23/EC
EC Noise Emission Directive 

2000/14/EC

Applied harmonised standards:

EN ISO 12100-1
EN ISO 12100-2
EN 60335-2-79
EN 55014-1(2002)
EN 55014-2(2001)
EN 61000-3-2 (2006)

Applied international standards and 
technical specifi cations: 

IEC 60335-2-79

Name and address of the person 
autho rised to compile the technical 
fi le:

Anton Sørensen
General Manager, Technical Operations EAPC 

Nilfi sk-Advance A/S
Sognevej 25
DK-2605 Brøndby

Identity and signature of the person 
 empowered to draw up the declaration 
on behalf of the manufacturer:

Anton Sørensen
General Manager, Technical Operations EAPC 

Nilfi sk-Advance A/S
Sognevej 25
DK-2605 Brøndby

Place and date of the declaration:

Hadsund, 2013-10-28

Содержание NEPTUNE 3























Отзывы:

Нет отзывов