Nilfisk-ALTO CIP10/14, Инструкция по применению

Страница: 7 / 26

Vers. 2.1
- 22.04.08
1
1. Preface
Low pressure cleaning systems from Scanio Flow-Equipment are used for
rinsing, foaming and spraying of detergents and sanitisers. The formation of
foam is achieved by mixing water, detergents or sanitisers and air in a specially
designed injector system.
It is important that your operational staff reads these directions for use prior to
installation and start of operation. Operation as laid down in the directions for use
will ensure an optimum level of hygiene and a minimum level of repair work in
your factory.
The combination of a centrifugal pump and an injector provides the possibility of
automatic and manual:
a)
- foam spreading of detergents and sanitisers
b) - rinsing with water
Note that all figures are placed at the back of these directions for use
(appendixes 4-A4).