INSTRUCTION FOR USE
ENGLISH
Terra™ 4300B
1464035000(1)2009-06
21
SKIRT HEIGHT AND OPERATION CHECK
Drive the machine on a level
fl
oor that is suitable for
1.
checking the skirt height.
Engage the parking brake.
2.
Turn the ignition key (72) to “0”.
3.
Side skirt check
Unscrew the knobs (23 and 21) and remove both left (20)
1.
and right doors (22).
Check the side skirts (13 and 14) for integrity. Replace the
2.
skirts when they have cuts (A, Fig. 13) larger than 0.8 in
(20 mm) or cracks (B) larger than 0.4 in (10 mm) (for skirt
replacement, refer to the Service Manual).
Check that distance from the ground of the side skirts
3.
(13 and 14) is within 0 - 0.1 in (0 – 3 mm) (A, Fig. 14). If
necessary, adjust the skirt height by using the slots on the
screws (A, Fig. 17).
Assemble the components in the reverse order of
4.
disassembly.
Front and rear skirt check
Remove the main broom as shown in the relevant
1.
paragraph.
Check the front (15) and rear skirts (16) for integrity.
2.
Replace the skirts when they have cuts (A, Fig. 13) larger
than 0.8 in (20 mm) or cracks (B) larger than 0.4 in (10
mm) (for skirt replacement, refer to the Service Manual).
Check that:
3.
The front skirt (A, Fig. 18) slightly touches the
fl
oor (A,
•
Fig. 15).
The distance from the ground of the rear skirt (B, Fig.
•
18) is within 0 - 0.1 in (0 – 3 mm) (A, Fig. 14).
If necessary, adjust the skirt height by using the slots on
4.
the screws (C and D, Fig. 18).
Press the front skirt lifting pedal (5) and check that the
5.
front skirt (A, Fig. 16) turns upward for about 90° (as
shown in the
fi
gure); then release the pedal and check
that the skirt does not remain in an intermediate position
but returns to its initial position. If necessary, for the front
skirt control cable adjustment or replacement, refer to the
Service Manual.
Assemble the components in the reverse order of
6.
disassembly.
S311400
S311401
Figura 13
Figura 14
S311402
S311403
Figura 15
Figura 16
A
A
S311404
Figura 17
S311405
Figura 18
https://harrissupplyind.com - To Order Parts Call 608-268-8080