Nilfisk-Advance SW 5070 B, Руководство по эксплуатации

Страница: 32 / 35

30
S31NUK5080(2)2001-01 TROUBLESHOOTING
BATTERY VERSION
THE MACHINE DOESN’T START 1) CHECK THE BATTERIES CHARGING AND EFFICIENCY
2) CHECK THE BATTERY/KEY
C1 CONNECTIONS
3) CHECK THE SWITCH KEY ( C1 )
4) CHECK THE MOTOR EFFICIENCY AND THE SAFETY MICRO
CONNECTIONS ( MSW 1 )
5) CHECK THE SOLENOID STARTER ( TL 1 )
6) CHECK THE FUSE F1 - it has to be added in the electric wir-
ing
7) CHECK THE MOTOR EFFICIENCY (M1)
THE MACHINE HAS NO TRACTION 1) CHECK THE TENSION BELT
2) CHECK THE ADJUSTING OF THE TRACTION LEVER CABLE
3) CHECK THE ADJUSTING TRACTION TRANSMISSION WHEEL
THE MACHINE DOESN’T SWEEP 1) CHECK EVENTUAL OBSTACLES TO THE MAIN BRUSH TURN-
ING (ROPES, WOODS) AND BALL BEARINGS
2) CHECK THE BELT AND THE BELT TIGHTENER
3) CHECK THE ADJUSTING MAIN BRUSH HEIGHT
THE MAIN BRUSH DOESN’T TURN
1) CHECK THE BELT TENSION
2) CHECK THE REDUCTION GEAR EFFICIENCY
THE MACHINE DOESN’T SUCKS 1) CHECK THE EVENTUAL CLOGGED FILTER
2) CHECK THE CORRECT FUNCTIONING OF THE CABLE AND
MECHANISM USED TO DISCONNECT THE FAN
THE FILTER SHAKER DOESN’T WORK 1) CHECK THE ELECTRIC CONNECTIONS
2) CHECK THE EFFICIENCY OF THE WORKING BUTTON ( C2 )
3) CHECK THE RELAY EFFICIENCY ( RL1 )
4) CHECK THE MOTOR EFFICIENCY ( M2 )
WHILE THE MACHINE IS WORKING
ALL FUNCTIONS STOP
1) CHECK THE CHARGING BATTERIES CONDITION (POSSIBLE
INTERVENTION OF THE BATTERY UNDERVOLATAGE CUT -
OUT. - 9,5 Volts -)
2) CHECK THE FUSE F1 . CONTROL THE ABSORPTION OF THE
ELECTRIC MOTOR M1 ; IF THE ABSORPTION IS OVER 80 Amp
CHECK ANY EVENTUAL OBSTACLE FOR A CORRECT MAIN
BRUSH TURNING, THEN CHECK THE BRUSH HEIGHT AD-
JUSTING