©
2014 Nil
fi
sk-Advance, Inc.
3/06 revised 8/14 Form No. 56040888 REV C
page 3 of 6
3
See Figure 2.
Route the Battery Charger Power Cord
(A)
up through the hole in the rear left corner of the machine as shown.
NOTE:
A long
piece if string or twine works well for this by dangling it down through the hole, tying it around the power cord plug and then pulling it back up.
4
Install the Cord Holder
(8)
using the Screws
(5)
and then the Bushing
(7)
.
NOTE:
There is no need to pre-drill holes for the screws they are
self-drilling. The Bushing
(7)
will prevent the Power Cord
(A)
from falling back down through the hole.
FIGURE 2