nilan VPR 120, Руководство по установке и обслуживанию

Страница: 23 / 40

22
HMI Control panel
Moving the control panel
The control panel has a factory-fitted 1.5 m wire. It is important that the control panel is placed in a visible spot
so the user can monitor the operation and see potential alarms. You may therefore have to move
the control panel.
The wire for the control panel is connected up to an electrical junction box on the same side of the ventilation unit where
the power supply for the unit is situated.
Nilan can supply a 10 or 20 m connection cable with an RJ12 connector. You can also customise a cable yourself of up to 50 m in length.
Use a standard LAN cable for this.
Wall bracket
Mount the HMI panel on the wall using the integrated wall bracket..
The panel should be placed in a visible spot so it is possible to change settings and to monitor warnings or alarms regarding operation
of the unit.
The wall bracket is located at the back of
the panel. You can detach it by loosening
the bracket at the bottom of the panel.
You can remove it.
Mount the wall bracket on the wall using
2 screws.
Click the RJ12 plug into place at the
bottom of the HMI panel. The wire can
run down along the wall, into the wall or
through the groove at the back of the
panel.