For single system metal closet:
Switches 1.2 represent Downlink and 3.4 represent Uplink. When it is necessary to adjust the gain by DIP switch, firstly
please adjust Downlink gain according to input signals, secondly please adjust Uplink gain according to Downlink gain.
The DIP Switches have default ‘OFF’ status; please push relevant switches to “ON” position if certain attenuation value
needs to be achieved.
DIP switch downlink attenuation setting:
DIP switch uplink attenuation setting:
Att
3
4
0 dB
off
off
5 dB
ON
off
10 dB
off
ON
15dB
ON
ON
For single system plastic closet?
Turn ON the dip switches to reduce gain as follows:
