7. REPEATER INSTALLATION
7.1 Installation requirements
7.1.1 Installation Location Requirements
No specific installation requirements shall be followed.
7.1.2 Power requirement
DC 12V. Connect the Power adapter to the cigar lighter.
7.2. Installation Steps
7.2.1. Installation schemes
INSTALLATION STEPS
1. Find a suitable position for an in-car antenna (e.g. under the seat of a driver).
2. Clear and dry the place where you’re going to fix the in-car antenna. Put up the nylon strap tightly on the
chosen position and stick the antenna firmly.
3. Plug in the in-car antenna into the indoor booster interface and fasten it tightly.
4. Mount out-of-car antenna onto the car trunk fixing it on the antenna's magnetic surface.
5. Plug in the out-of-car antenna into the outdoor booster interface and fasten it tightly.
6. Connect the Power adaptor to the cigar lighter. If the indicator on the booster lights up the installation has
been made correctrly.
NOTE: Switch on the signal booster only after installing out-of-car and in-car antennas correctly!
7. Test the signal of your mobile telephone. After installation, mobile signal should get maximally strong within
all the car area. In case the mobile connection is still instable try to change the position of the antennas for a
better result.
7.2.2 Repeater’s ports description
1. Outdoor port: connected with the outdoor antenna by cable
2. Indoor port: connected with indoor antenna directly or by cable (depending on a booster model)
3. Connect the Power supply into the cigar lighter.
7.2.3 Accessories selection
No need. Use standard accessories.
