En-14
4.4 Removing attachment
When scanning slides with fl at mounts or slides less than 2 mm thick, you will need to remove
the attachment. Use the attachment utility as described above to move the feed mechanism
into the magazine, then remove the attachment and click
OK
to return the feed mechanism to
its initial po si tion.
4.5 What to do if the feeder jams
If a jam occurs, open the magazine cover and remove the slides remaining in the feed and eject
mag a zines. Pull back the feed push-plate and hook it in the notch so that it does not spring
back to its original position.
The method for resolving a jam depends on the position of the feed mechanism when the jam
occurred. If the jammed slide is visible in the magazine and the feed mechanism has returned
to its housing in the front of the unit, the jammed slide can be removed with your fi ngers. If the
feed mechanism has locked while feeding a slide, you will need to exit Nikon Scan and use the
attachment utility to resolve the jam (the attachment utility is a special program for the SF-210
distributed with the Nikon Scan software that came with your scanner).
