En-12
The "attachment utility" (FDUtility) window will appear on the desktop. If more than one scan-
ner is attached to your computer and powered on, select the scanner to which the SF-210 is
attached from the
select a scanner
pop-up menu.
Nikon Scan does not support simultaneous connection of more than one scanner.
4.2 Removing slides
Slides will be sent to the ejection magazine after scanning. To remove slides from the ejection
magazine, pull back the push plate and remove the slides. Slides must be removed before the
ejection magazine fi lls up.
4.3 Using the Feed-Mechanism Attachment
Thick mounts (over 2 mm thick) with rounded edges may not feed properly when used with the
SF-210. A removable plastic part is pro vid ed for at tach ment to the feed mechanism, enabling
the scanner to feed such slides. A special attachment utility program, provided with the Nikon
Scan soft ware that came with your scan ner, is required both when attaching this part to and
removing it from the feed mechanism.
To attach the feed-mechanism attachment, the scanner must be connected to the computer.
Both the scanner and computer must be on and Nikon Scan must not be running. After inserting
the SF-210 into the scanner as described above, open the folder to which you installed Nikon
Scan and then double-click the
FDUtility
icon (Windows) or double-click the
Attachment
Utility
icon in the
Utility
sub-folder (Macintosh). The attachment utility will start.
Win dows
Macintosh
