14
E
Use the PHC selector to select your
desired print type before shooting.
•You can select any one of three print types
(P, H or C) by switching the PHC selector
at any time while film is loaded. (
-
P. 4)
Available picture area differs depending on
the print type selected.
•You can also change the type of print when
ordering extra prints at the photo lab.
CAUTION!
To prevent possible injury to your eye,
hold the camera away from your face
when you operate the PHC selector.
Viewfinder indications
Selecting a print type
1
Parallax compensation marks
For close-up shooting at a distance of approx. 0.4 to 1m
(1.3 to 3.3 ft.)
2
Autofocus frame mark
Center this mark on the subject.
3
Orange LED
If lit continuously: Flash is ready to fire.
If blinking: Flash is recycling and not to ready to fire, Film is rewinding, or Flash is
not popped up all the way.
4
Green LED
If lit continuously: Correct focus has been achieved.
If blinking: Correct focus has not been achieved or the shooting distance is closer
than approx. 0.4m (1.3 ft.)