Nikon F 100, Инструкция по эксплуатации

Страница: 60 / 112

60
Multiple Exposure
2 Rotate the Main-Command Dial while pressing the
˚
button to set the desired exposure
compensation.
• Exposure compensation is necessary depending on the number of
exposures in multiple exposure since more than one image is exposed in
the same frame.
• Standard compensation value:
Number of exposures Compensation value
Two –1.0 EV
Three –1.5 EV
Four –2.0 EV
Eight or Nine –3.0 EV
• Test shooting is recommended since the compensation actually required
varies depending on the shooting situation.
• When the background is completely dark and subjects do not overlap, no
compensation is necessary for each shot.
• In some cases, frames may shift slightly in multiple exposure. In particular,
film advance/rewind becomes unstable at the beginning and near the end
of a film roll so multiple exposure is not recommended.
•
Multiple exposure consists of two or more exposures of one or more
subjects in the same frame. Multiple exposure can be performed in any
of the available exposure modes.
1
Rotate and set the film advance mode selector to
Z
while pressing the film advance mode selector lock
release.
F100_En_16 7/8/05 8:06 PM Page 60