Nikon Epiphot 300 Скачать руководство пользователя страница 13

Страница: 13 / 80

ASSEMBLY

Assemble the following parts and components in the order

of their numbers given as below.

Tools required/or assembly: One hexagonal screwdriver,

one hexagonal wrench, a pair of centering tools and one

screwdriver for cross-recessed head screws. The first three

are supplied with the microscope.

This microscope is a precision instrument. Handle it with enough care.

Do not give it strong impacts. Do not operate it forcibly. They both may cause malfunction.

Where to Install

• Do not install the microscope in a bright environment where it is

exposed to direct sunlight or placed right beneath the room lamps.

If the surrounding environment is brighter than necessary, the

focused sample image may not be clearly visible.

• Install the microscope in a place free from dust or dirt.

• Install the microscope flat on a level surface.
• Install the microscope in the following environment where the

room temperature is in the range of O to 40

C and the relative

humidity is 85% or below.

High temperatures and high humidity may cause mold and dew to

be formed on the lenses. They may also degrade the performance

of the microscope or result in malfunction.

Lamphouse Adapter

When using 12V-100W Halogen Lamp as a

Light Sourse

(See pages 12, 13 as to when 12V-50W

halogen lamp is used as a light source or when

the metal halide light source is used.)

Insert the lamphouse adapter into the sleeve in

the back of the microscope. Three cross

recessed head screws are supplied with the

adapter.

Insert two of them into the two screw holes in

the upper part of the adapter. Tighten these two

screws with a screwdriver. (The two tightened

screws provide the adapter with enough strength

without the third screw tightened into the screw

hole in the lower part of the adapter.)

0 Lamp and Lamphouse

*When using 12V-100W Halogen Lamp as a

Light Sourse

(See pages 12, 13 as to when 12V-50W

halogen lamp is used as a light source or when

the metal halide light source is used.)

( CAUTIONS)

• Use 12V-100W halogen lamp (specified in

'Electrical Specifications' on page 72) and the

Nikon 12V-l OOW lamphouse 2 with pre

centered socket,

• Wait until the lamp and the lamphouse cool

down sufficiently before replacing the lamp.

• Tum off the power s-witch and unplug the

power connector before replacing the lamp.

This avoids electrical shocks or damage to the

microscope.

• Do not touch with bare hands the glass surface

of the lamp to be mounted. Dirt or fingerprints

on the surface may degrade the illuminating

capacity of the lamp. If fingerprints or dirt are

left on the surface, wipe them off and keep the

lamp always clean.

• Insert the 12V -lO0W lamphouse 2 firmly into

the microscope base before fixing this

lamphouse.

• Remove the filter holders before detaching the

12V-IO0W lamphouse 2.

Содержание Epiphot 300

















































































Результаты поиска

Содержание Epiphot 300

Отзывы:

Похожие инструкции для Epiphot 300

Бренды по названию

Популярные бренды

Nikon Epiphot 300, Руководство пользователя

Результаты поиска

Содержание Epiphot 300

Отзывы:

Похожие инструкции для Epiphot 300

Бренды по названию

Популярные бренды