Nikon Eclipse LV100POL, Инструкция по эксплуатации, Страница: 56 / 65

54
10
Attaching a Camera (for the Trinocular Eyepiece Tube)
To attach a photomicrography device such as a camera onto the vertical tube of the trinocular
eyepiece tube, you must use two adapters: First, attach the TV vertical tube adapter onto the
trinocular eyepiece tube. Second, attach a suitable adapter for the camera mount part (C mount
adapter or so on) onto the TV vertical adapter.
Check the mount part type of your camera and prepare the suitable adapter beforehand.
1 Mount the TV vertical tube adapter or the TV
vertical tube adapter 0.55x onto the vertical tube
section of the trinocular eyepiece tube.
2
Attach the suitable adapter for the camera onto the
tip of the TV vertical tube adapter.
3 Attach the camera head to the adapter tip.
4 Attach the camera cable to the camera head.
Adjust the camera head position before using the camera.
11
Attaching Eye Level Risers
Optional eye level risers are used for the adjustment
of the height of the eyepiece tube to fit the observer’s
eye point. Up to two eye level risers can be attached
in piles. When one eye level riser is attached, the
eyepiece height rises 25 mm.
Attaching an eye level riser
1 Loosen the clamp screw for the eyepiece
sufficiently, then insert the eye level riser with
fitting the dovetail junctions of the eye level
riser and the illuminator.
2 Secure the eye level riser by tightening the
clamp screw.
3 Attach the eyepiece tube on the eye level riser.
Eye level riser