Nikon Coolpix P300, Руководство пользователя

Страница: 131 / 200

119
Recording Movies
M
o
vie
Rec
o
rdi
n
g
and Playback
B
Notes on Movie Recording
• When recording a movie onto a memory card, a memory card with an SD speed class of Class 6 or
higher is recommended (
A
167). If the transfer speed of the card is slow, the movie recording may
end unexpectedly.
• When recording movies, the angle of view (i.e., the area visible in the frame) is narrower than that
of still pictures.
• Using a digital zoom causes image quality to deteriorate. If you start recording the movie without
using digital zoom, and you rotate the zoom control toward
g
, the zoom stops at the maximum
optical zoom ratio. Release the zoom control and rotate it again toward
g
to trigger digital zoom.
When recording ends, digital zoom turns off.
• The sound of using the zoom control, zoom, autofocus, vibration reduction or aperture control
when the brightness changes may be recorded.
• The following phenomena may be seen on the monitor while recording movies. These
phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor lighting.
- Subjects that move quickly from one side of the frame to the other, such as a moving train or car,
may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is moved.
B
Movie Recording of a Subject for Which Autofocus Does Not Perform as
Expected
Autofocus may not perform as expected (
A
29). Should this occur, try the following:
1. Set to
A
(Auto) mode, or set AF area mode (
A
83) to Center or Manual in
A
,
B
,
C
or
D
mode.
2. Before recording, set Autofocus mode (
A
125) in the movie menu to
A
Single AF (default
setting).
3. Position the focus area on a different subject at the same distance. Press the
b
(
e
movie-record)
button to start the movie recording, and change the composition.
B
Note on the Camera Temperature
The camera may become warm when recording movies for an extended period of time or when the
camera is used in a hot area. This is not a malfunction.
C
Functions Available in Movie Recording
• The creative slider, exposure compensation or white balance settings are also applied to the movie
that is recorded. Hue adjustment in the scene mode (
A
41) or special effects (
A
56) is also applied
to the movie that is recorded. In macro mode, a movie can be recorded closer to the subject. Check
the settings before starting to record the movie.
• The self-timer (
A
35) can be used. If the self-timer is set and the
b
(
e
movie-record) button is
pressed, the camera starts movie recording after ten or two seconds.
• Flash does not fire.
• Press the
d
button before starting to record the movie to display the
D
(movie) tab and select
movie menu settings (
A
122).
• Settings cannot be changed during movie recording. Before movie recording, check the settings.