background image

6

7

En

Fr

En

Fr

Storage

•  Water condensation or mold may 

occur on the lens surface because 

of high humidity. Therefore, store 

the Nikon Laser Rangefinder in a 

cool, dry place.

  After use on a rainy day or at night, 

thoroughly dry it at room 

temperature, then store in a cool, 

dry place.

CARE AND MAINTENANCE

Lenses

•  When removing dust on the lens 

surface, use a soft oil-free brush.

•  When removing stains or smudges 

like fingerprints from the lens 

surface, wipe the lenses very gently 

with a soft clean cotton cloth or 

quality oil-free lens tissue. Use a 

small quantity of pure alcohol (not 

denatured) to wipe stubborn 

smudges. Do not use velvet cloth 

or ordinary tissue, as it may scratch 

the lens surface. Once the cloth has 

been used for cleaning the body, it 

should not be used again for the 

lens surface.

Main body

•  Clean the body surface with a soft, 

clean cloth after blowing away dust 

with a blower* lightly. Do not use 

benzene, thinner, or other cleaners 

containing organic solvents.

* A blower is rubber cleaning 

equipment that blows air from a 

nozzle.

SAFETY PRECAUTIONS

Cautions

•  This product is not designed for use 

underwater.

•  Rain, water, sand and mud should 

be removed from the rangefinder 

body surface as soon as possible, 

using a soft, clean cloth.

•  If the Nikon Laser Rangefinder is 

exposed to sudden changes in 

temperature, water condensation 

may occur on lens surfaces. Do 

not use the product until the 

condensation has evaporated.

•  Do not leave the Nikon Laser 

Rangefinder in a car on a hot or 

sunny day, or near heat-generating 

equipment. This may damage or 

negatively affect it.

•  Do not leave the 

eyepiece in direct 

sunlight.

  The condenser 

effect of the lens 

may damage the 

internal display 

surface.

This symbol indicates that this battery is to be 

collected separately.

The following apply only to users in European 

countries.

 • This battery is designated for separate collection  at an 

appropriate collection point. Do not dispose of as 

household waste.

 • For more information, contact the retailer or the local 

authorities in charge of waste management.

Symbol for separate collection applicable in European 

countries

This symbol indicates that this product is to be 

collected separately.

The following apply only to users in European 

countries.

 • This product is designated for separate collection  at 

an appropriate collection point. Do not dispose of as 

household waste.

 • For more information, contact the retailer or the local 

authorities in charge of waste management.

Symbol for separate collection applicable in European 

countries

[Getting to know the Laser Rangefinder]

 

Key features

•  Measurement range of actual distance:

 

7.3-915 meters/8-1,000 yards

•  VR (Vibration Reduction) function is employed for 

reducing the vibrations caused by hand movement

Horizontal distance mode and actual distance mode 

can be easily switched

Target Priority Switching System for measuring 

overlapping subjects

•  High-quality 6x finder with multilayer coating

•  Larger ocular for easy viewing

•  Press and hold down the PWR button to activate the 

continuous measurement function

•  Automatic power shut-off (approx. 8 sec. 

unoperated from standby screen)

•  Waterproof and fogproof, but not designed 

for underwater usage (the battery chamber is 

rainproof)

•  Invisible/Eyesafe EN/IEC Class 1M Laser

The Nikon Laser Rangefinder uses an invisible 

laser beam for measuring. It measures the time the 

laser beam takes to travel from the rangefinder 

to the target and back. Laser reflectivity and 

measurement results may vary according to 

climatic and environmental conditions, as well 

as the color, surface finish, size, shape and other 

characteristics of the target.
The following conditions facilitate measuring:

•  Cloudy weather

•  Bright-colored target

•  Large-size target

•  When laser incidence to the target’s reflective 

surface is straight

Measurement may be inaccurate or fail in the 

following cases:

•  In snow, rain or fog

•  Small or slender target

•  Black or dark target

•  Target has stepped surface

•  Moving or vibrating target

•  When measuring the surface of water

•  Target measured through glass

•  When the target is glass or a mirror

•  When laser incidence to the target’s reflective 

surface is oblique

Содержание ARROW ID 7000 VR
























Отзывы: