Nikon AF-S DX Nikkor 18-55mm/F3.5-5.6G VR, Руководство по ремонту

Страница: 47 / 113

JAA80351-R.3739.A
- 22-・F-S DX 8-55/3.5-5.6G VR - dditional Page
Ｍ
サービス
計画課
January���2��8 ���2��8 ��2��8 �2��8 2��8
・
Turn each power of the monitor, LINE GENERTOR, and MEGLIGHT 100 to ON.
djust the calibrated cross lines by rotating the "LIGHT CONT." knob of "MEGLIGHT 100" and rotating
the focus ring from "infinity"-end so that the intersection of the cross lines can be seen clearly.
・
Unlock the holder-moving lever, and move the holder down slowly by the lever.
Y-axis
X-axis
Caution:
In case the cross lines are tilted, adjust them by
turning the chart, which is screwed in the rear
tube of the equipment.
Cross lines
・
Mount the lens on the equipment (for periphery).
Refer to [(2) Center positioning of rear lens-group holder] (Page 22-�) Center positioning of rear lens-group holder] (Page 22-�) rear lens-group holder] (Page 22-�) for how to mount the
lens.
・
Set the zoom ring to "24 mm".
Caution: Do NOT set the zoom ring to TELE position longer than "24 mm". Otherwise, the lens will
come off from the attachment holder (J19127P).
・
Secure the zoom ring with tape, etc.
(5) 4th lens group alignment
Caution: Be careful NOT to damage the 4th lens group by the attachment holder (J19127P).
Zoom ring
Tape
Focus ring
INC