147
T
echnical Notes
Problem
Solution
Monitor is
hard to read
• Ambient lighting too bright: use electronic viewfi nder.
• Monitor brightness needs adjustment.
• Monitor is dirty: clean monitor.
4
127
141
No picture is
taken when
shutter-
release button
is pressed
• Camera is in playback mode.
• Batteries are exhausted.
• Number of exposures remaining is zero: insuffi cient memory to
record picture at current image quality and size settings.
• Flash indicator blinks: fl ash is charging.
• Message “CARD IS NOT FORMATTED” appears in monitor:
memory card is not formatted for use in camera.
• Message “NO CARD PRESENT” appears in monitor: no memory
card in camera.
55
14
14
18
104
10
Pictures are
too dark
(underexposed)
• Flash is off.
• Flash window is blocked.
• Subject is outside range of fl ash.
• Exposure compensation is too low.
• Shutter speed blinks: shutter speed too fast.
• Aperture blinks: f/-number too high.
34
16
150
39
42
43
Pictures are
too bright
(overexposed)
• Exposure compensation is too high.
• Shutter speed blinks: shutter speed too slow.
• Aperture blinks: f/-number too low.
39
42
43
Pictures are
out of focus
• Subject not in focus area when shutter-release button was
pressed halfway or
button was pressed.
• Camera can not focus on selected subject using autofocus. Use
focus lock.
18
20
Pictures are
blurred
• Camera shook during shot: choose faster shutter speed. If shut-
ter speed can not be increased without causing underexposure:
◆
Use fl ash
◆
Zoom camera out
◆
Raise sensitivity (ISO equivalency)
◆
Select larger aperture (smaller f/-number)
To minimize blur at slow shutter speeds:
◆
Use Best Shot Selector (BSS)
◆
Mount camera on tripod and use self-timer
40
34
16
46
40
84
36
Pictures con-
tain randomly-
spaced bright
pixels (“noise”)
• Sensitivity (ISO equivalency) too high.
• Shutter speed too slow. At shutter speeds of ¼ s or slower, turn
noise reduction on.
46
101