Page - 13 -
PSS 25 - 0304
5 Safety
Instructions
All fastening points must set up as is depicted in track 4.5. The manufacturer takes no
responsibility for improper assembly. Be aware of correctly aligned assembly at track
crossings. An optimal running quality can only be guaranteed by correct alignment of
the parts. After assembly of the fastening coupling, the track is pushed into the
coupling and fixed centrally to the security screws lying above. With poor fixing the
tracks can slide out of the coupling due to one sided pressure. (Risk of falling)
Use of the track is exclusively permitted with Carrier Type 25.T20 and 25.T40.
The Carrier 25.T10 is only to be used for materials.
Persons and materials can not be carried in one Carrier.
6 Servicing
All Person safety systems NIKO PSS 25 are subject to repeated inspection. The
inspection intervals depend on the use and demands placed on equipment.
Fundamentally the following minimum intervals are to be kept.
In the case of security equipment in use 1 X monthly
Examination checklist 1 X year
In the case of security equipment in use 1 X weekly
Examination checklist 4 X year
In the case of security equipment in use daily (high wires, event arrangements)
Examination checklist 1 X week
After previous agreement, special equipment is to be dealt with separately by an
authorized inspection office.