1.
2.
1.
The potentiometer underneath the cover of the sensor can be used for changing the light sensitivity setting to any value
between 5 and 1,200 lux.
To change these settings:
Open the cover.
Use a screwdriver to turn the potentiometer to the desired setting. Turn the potentiometer clockwise to decrease the light sensitivity
(up to a maximum of 1,200 lux or daylight). Turn the potentiometer counter-clockwise to increase the light sensitivity (up to a
minimum of 5 lux or night-time).
Setting the switch-off delay
The switch-off delay can be set in the Niko Home Control programming software. After the installation, the user can adjust this
setting himself in the software.
Technical data
working voltage: 26 Vdc (SELV, safety extra-low voltage)
CE marked
detection angle: 180° horizontal, 60° vertical
detection range: 8 m (horizontal)
light sensitivity: 5 - 1,200 lux
manual mode option
ambient temperature: 5 – 40 °C
