Installation
• Connect the touchscreen with the RJ45 port 1, 2 or 3 of the connected controller. Use a twisted pair cable
(preferably a shielded FTP or STP). Both the touchscreen and the connected controller are equipped with a
RJ45 port. Therefore the RJ45 connectors must be attached to the cable to connect the connected controller
on the one side and the touchscreen on the other, or you can make use of a cable with pre-mounted RJ45
connectors.
• The touchscreen can be supplied with power using Power over Ethernet (PoE) via the same twisted pair
cable, for which you use the Niko PoE power supply (550-00501). Alternatively, you can provide a separate
power supply cable, which you connect to a separate 24 Vdc power supply module in the electrical cabinet.
In that case, you will need a 24 V power supply cable such as an SVV, JYSTY, TPVF or UTP cable in addition
to the twisted pair cable.
Connection diagrams
With Power over Ethernet (PoE)
* twisted pair cable (UTP, FTP of STP)
L
N
550-00501
42
Touchscreen
