31
10-806
EN
3.2. Connecting a door opener
Internal resistance of the door opener Action
> 6 Ω
1. Connect the door opener to terminals
19 and 20 (8-12 Vac) of the power
supply.
< 6 Ω
1. Add a transformer (10-819) to the
electrical cabinet.
2. Connect the door opener to terminals
18 and 20 of the power supply (see
figure below).
3.3. Connecting a lighting circuit
Connect the lighting circuit to terminals 21 and 22 of the power supply. This is the
potential-free contact (max. 24 V and 1 A) of the power supply.
3.4. Testing the connection
Action
Result
Switch on the power supply.
The LED on the video power supply lights
up. The name plate of the external video
unit is illuminated.
Briefly press the speech key on the
internal unit to initiate a conversation
with the visitor.
The image of the visitor appears on the internal
unit. The communication is interrupted by
pressing briefly on the speech key again,
or it will be automatically interrupted after
one minute.
Press one of the unprogrammed push
buttons on the external unit or a specific
push button on the internal unit.
You will hear a beep. The lighting relay
from the power supply is switched on.
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17
230-240 V
50- 60 Hz
16 VA
PRI
SEC
8V
12V
2A
1,34A
PTC
ta 45/E IP20
EN 61558-2-8
10-819