
29
10-801 /10-802
step 4:
ending programming status
Briefly press
The LED lightens steadily.
the “mode” button
4. technicaL Data
POWER SUPPLY 20 (10-801):
Dimensions: ........................4U wide (h90 x w72 x d70mm)
Input: .................................230V~, 50Hz
Output (bus): .......................24V, 50mA (a and b)
Additional power supply: ......P-wire (24V DC)
Connectable doorlock: .........8-12V~
Potential free contact: .........24V DC and 1A
POWER SUPPLY 100 (10-802):
Dimensions: ........................6U wide (h90 x w105 x d70mm)
Input: .................................230V, 50Hz
Output (bus): .......................3 x 24V, 60mA (a and b)
Additional power supply: ......P-wire (24V DC)
Connectable doorlock: .........24V DC and 1A
Potential free contact: .........24V DC and 1A
5. LegaL Warnings
- The installation has to be carried out by a qualified person and in compliance with the
statutory regulations.
- This user manual has to be handed over to the user. It has to be included in the electri-
cal installation file and has to be passed on to any new owners. Additional copies are
available on the Niko website or via the support service.
- During installation, the following has to be taken into account (not limited to list
below):
- The statutory laws, standards and regulations;
- The state of the art technique at the moment of installation;
- This user manual, which must be read within the scope of each specific installation,
only states general regulations;
- The rules of proper workmanship
EN
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17
1
1
3
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17
1
1
3