33
10-511 (-50)
EN
Blocking set ring tones
The different set ring tones
(external unit 1, external unit
2, internal call, call at the floor
bell push button) can no longer
be modified.
Blocking set program-
mings
Programmings can no longer
be modified.
Deblocking set program-
mings
Attention!
First enter the programming
mode on the power supply.
Then carry out steps 1 up to
and including 4. Finally exit
the programming mode on the
power supply.
Returning to fabric
settings
Press the door open key
for 8s.
Step 4:
Exit the programming mode of the internal unit
Press function key 3 in order to exit the programming mode of the internal unit. The programming
mode is automatically exited if no key is pressed for 8s.
* ATTENTION:
When taking into use, you can set the ring tone of an external unit (see
‘POSSIBLE SETTINGS’). If you wish to distinguish between the ring tones of 2 external units,
carry out the above programming. From now on, you must ALWAYS set the ring tones for
both external units separately!
You can also program the above settings by means of the service set 10-870 (see user
manual service set).
Содержание 10-511
Страница 12: ...12 10 511 50...
Страница 24: ...24 10 511 50...