Niko 10-286 Скачать руководство пользователя страница 42

EN

42

10-286 / 10-386

8. MAINTENANCE

With the following maintenance tips you will avoid surface damage:
• Clean the product with some soap and a damp cloth. 
• Never use: 

 

- abrasive sponges or abrasive detergents; 

 

- maintenance products that contain solvents or acids, or cleaning products containing acetic acid.

9.  WARNINGS REGARDING INSTALLATION

• The installation should be carried out by a registered installer and in compliance with the statutory regulations.
• This user manual should be presented to the user. It should be included in the electrical installation file, and it should be passed on to any new owners. 

Additional copies are available on the Niko website or via the Niko support service.

• During installation, the following should be taken into account (non-exhaustive list):

 

- the statutory laws, standards and regulations.

 

- the technology currently available at the time of installation.

 

- this user manual, which only states general regulations and should therefore be read within the scope of each specific installation.

 

- the rules of proper workmanship.

This product complies with all of the relevant European guidelines and regulations. If applicable, you can find the EC declaration of conformity regarding 
this product at www.niko.eu.

10. NIKO SUPPORT

In case of doubt or for the specific exchange procedure in case of a possible defect, contact the Niko support service in Belgium at +32 3 778 90 80 or your 
wholesaler/installer. Contact details and more information can be found at www.niko.eu under the “Help and advice” section.

11. GUARANTEE PROVISIONS

• The period of guarantee is four years from the date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there is 

no invoice, the date of production applies.

• The consumer is obliged to inform Niko in writing about the non-conformity, within two months after stating the defect.
• In case of a non-conformity, the consumer only has the right to a product repair or replacement free of charge, which shall be decided by Niko.
• Niko shall not be held liable for a defect or damage resulting from incorrect installation, improper or careless use, incorrect operation, transformation of the 

product, maintenance that does not adhere to the maintenance instructions or an external cause, such as damage due to moisture or overvoltage.

• The compulsory regulations of the national legislation concerning the sale of consumer goods and the protection of the consumer in the countries where 

Niko sells, directly or via sister companies, subsidiaries, chain stores, distributors, agents or permanent sales representatives, take priority over the above-
mentioned rules and regulations.

Do not dump this product with the unsorted waste. Bring it to a recognised waste collection point. Together with producers and importers, you have an 
important role to play in the advancement of sorting, recycling and reusing discarded electrical and electronic appliances. In order to finance the waste 
collection and processing, the government levies a recycling contribution in some cases (included in the purchase price of this product).

Содержание 10-286

















































Отзывы: