
EN
38
10-286 / 10-386
6. Mounting front plate
• Place the hinges over the bolts, included in the flush-
mounting box (fig. 6).
• Secure the hinges using the nuts (M3).
• Mount the front plate on the flush-mounting box with
the included screws and Allen key. Ensure that the
sealings are pressed against the wall.
Before completely securing the hinges, adjust the front plate
until it is against the wall.
4. STARTING THE DEVICE
Disconnect all power before installing the internal unit. Do not connect the device to the mains voltage until installation has been completed.
- When connecting the video signal, V1(+) and V2(-), keep in mind the polarity.
- Check for a short circuit between a, b and P before connecting the installation to the mains.
Start
After installation to the mains, the following screen will appear
after 5 s:
10 s after switching on, the start screen will appear. The device is
in standby mode.
5. OPERATION AND USE
5.1. Call and speak with resident using smart keys
Code lock module
Display
Start
Select the first letter
Press one of the smart keys
. All first letters from the
list are shown.
Select the first letter
Press the smart key repeatedly
until the desired letter
is selected.
Confirm your choice using the smart key
. The resident
list appears. The first name with the selected first letter is now
marked.