![background image](http://html1.mh-extra.com/html/niko/10-282/10-282_manual_1689536014.webp)
14
10-282 / 10-382
Notes:
- Optionally, you can connect an additional door open relay (10-835) to terminals P and R.
- POWER SUPPLY 20 (10-801) or POWER SUPPLY 100 (10-802) is always used in combination with a DC power supply 2.5A (10-805). Connect the bus (wires
a and b) to terminals a and b of POWER SUPPLY 20 or POWER SUPPLY 100. Connect the P-wire to the ‘+’ terminal of the DC power supply 2.5A. You can
connect the video signals (for 10-382) V1 and V2 directly to terminals V1 and V2 of the internal unit(s) (fig.4).
- For more details on the connection of the internal units, see user manual of the internal units.
Optional:
- connection of the door opener to terminals 16 and 17 of the power supply module
- connection of the bell push buttons on the actual floor (connections E and P in the internal unit);
- connection of a bell relay (see technical catalogue).
fig.3: wiring diagram of a Access Control Standard system (with 10-382)
EN
230V~
a b E P M
a b E P M
P M
a b R P S V1 V2
16 17
L N
230V~
L N
a b
+ -
1 2 3 4 5 6 7 8 9 10 11 12
14 15 16 17 18 19 20 21 22 23 24 25
13
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17
43
18
44
19
45
20
46
21
47
22
48
23
49
24
(Fonts)
10-805-01
10-801
10-805-01
12V 1A max
12V 1A max
�
�
K
V2
K
V1
V1 V2