05-206
37
- Once the desired input is selected and is briefly (< 1,6s.) pressed, ‘mode select’ is
activated (see 3.2. ‘Mode select’).
- Once the desired input is selected and is pressed for a long time (> 1,6s.), an ‘on’
telegram is sent from this input. This can be used to program Nikobus actors that need
to be related to this contact input.
- By pressing or if there is no activity during 5s., the system returns to its standard,
i.e. ‘status’ (see 4. OPERATION).
3.2. ‘Mode select’
‘Mode select’ is activated by briefly (< 1,6 s.) pressing (see 3.1. ‘Input select’). The
display shows the following:
Fig. 5: ‘mode select’
The 6 inputs are displayed. The same input that was selected in ‘input select’, remains
selected here. At the bottom, the different modes are displayed. The presently selected
mode is displayed between brackets.
GB
1
2 3 4 5 6
[AUTO] ON OFF