05-206
36
If the power supply is connected for the first time, the display will show the following:
Fig. 3: start up
After approx. 8s., the display shows ‘status’ (see 4. OPERATION). As a standard, all inputs
are programmed in ‘auto mode’. (see 3.2. ‘Mode select’).
3. PROGRAMMING
For programming, the LCD display shows ‘input select’ and ‘mode select’.
3.1. ‘Input select’
‘Input select’ is activated by pressing . The display shows the following:
Fig. 4: ‘input select’
The 6 available inputs are displayed, input 1 is selected automatically.
- Press to successively select the different inputs (1 to 6).
GB
Niko nv-sa
BINAIR IN v1.0
1
2 3 4 5 6