background image

Copyright (C) 2010 NIKKARI Co., Ltd. All Rights Reserved

For Safe Use of Hedge Trimmer

 

Be sure to read this manual to have a good 
understanding of the contents before handling the 
hedge trimmer.

 

Keep the manual carefully in a readily accessible 
location.

Contents

Important Information ·····························2
Warranty and Disclaimer ·························3
1  Safety ·······················································4

1.1  Warnings ····························································4
1.2  General Precautions ······································7
1.3  Safety Devices and Protective Guard···13
1.4  Protective Equipment ································14
1.5  Noise·································································15
1.6  Vibration ·························································15

2  Outline ··················································16

2.1  Name of Parts and Their Functions ······16
2.2  Attached Material ········································18
2.3  Model and Position of Serial No. ···········18

3  Installation and Adjustment ·········19

3.1  Assembly of Engine ····································19
3.2  Assembly of Handle ····································19
3.3  Assembly of Terminal for Lead Wire ····21
3.4  Connection/Adjustment of Throttle Cable ····22
3.5  Adjustment of Idling Engine Speed ·····23
3.6  Adjustment of Cutter Bar Angle ············24
3.7  Installation/Adjustment of Harness ·····25

4  Operation ············································26

4.1  Pre-operation Check ··································26
4.2  Start and Stop ···············································27
4.3  Description of Cutting Techniques ·······31
4.4  Precautions for Operation ························31
4.5  Examples of Use ···········································32
4.6  Actions after Operation·····························33

5  Maintenance ······································34

5.1  Maintenance List ·········································34
5.2  Daily ··································································35
5.3  10 Hours or the First Month after Start ···36
5.4  Every 20 Hours or 3 Months ····················37
5.5  Every 50 Hours or 6 Months ····················39
5.6  Every 100 Hours or 1 Year ························40
5.7  Every 300 Hours or 2 Years ······················40

6.  Storing ··················································41
7.  Waste Disposal ··································42
8.  Troubleshooting ·······························43
9.  Service after Sales ·····························45
10. Technical data (EN31806) ··············46

NIKKARI Hedge Trimmer

NTP-26, NTP-26H 

NTA-26N, NTA-26HN, NTA-35N, NTA-35HN

Instruction Manual

NTA-26N

NTP-26

Original Instruction

This is a manual downloaded from the web site.

Explanation in the manual which comes together with your purchased product may differ from your product. Use the manual for reference.

Содержание NTA-26HN














































Отзывы: