■
How To Transmit Audio/Video from Your VCR
1.
Connect VCR and transmitter with 3.5mm stereo plug (4 pole) to 3RCA
plug AV cable, just plug RCA plugs to RCA sockets of VCR and plugs 3.5
stereo plug to A/V in port of transmitter. If your VCR has only SCART
socket for audio/video output, you can use a SCART/RCA adapter (not
included) to connect the RCA plug of the transmitter and the SCART socket
of VCR. Please follow the instruction figure below.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet (or 120-volt). Use only the adapter
provided.
3.
If you VCR have only one set of A/V output jacks and you want to use it
with a nearby TV. Connect 75ohm RF coaxial cable (not included) from the
modulator signal OUT port on your VCR to the RF IN port on your TV.
(Note: In order to also view cable programs on that TV, connect your
incoming cable TV source to the IN port of the VCR.)
4.
Locate and orient the transmitter according to the section of this manual
titled
"
Orienting Units for Optimum Performance
"
for best performance of
transmitter.
YELLOW
WHITE
RED
LINE
IN
OUT1
LINE
IN
VCR
TV ANT IN
LINE
OUT
TV
RF IN
75 OHM Coaxial Cable
(must be
purchased)
A/V IN
SCART/RCA Adapter
(Not Included)
Recommended TV connection for
dual-output VCR's SCART CONNECTOR A/V CABLE
OUT2
3.5mm stereo plug (4 pole)
to scart plug cable
adapter
Power
IR Header
￡
¨Place To IR Window Of VCR
￡
?
TRANSMITTER
Fig. 1a
7
LINE
IN
LINE
IN
VCR
TV ANT
IN
LINE
OUT
75 OHM Coaxial Cable
(must be
purchased)
3.5mm stereo plug (4 pole)
to scart plug cable
IR Header
￡
¨Place To IR Window Of VCR
￡
?
adapter
Power
TRANSMITTER
TV
RF
IN
Recommended TV connection for
dual-output VCR's SCART CONNECTOR A/V CABLE
OUT1
OUT2
A/V IN
Fig. 1b
Units for Optimum Performance of transmitter.
■
How To Transmit Audio/Video from Your Satellite Receiver
You can transmit audio/video either directly from your satellite receiver, or by
connecting them to your VCR. To transmit directly from your satellite receiver,
follow the instructions below.
1.
Connect satellite receiver and transmitter with RCA cable, just plug RCA
plugs to RCA sockets of satellite receiver.
If your satellite receiver has only SCART socket for audio/video output, you
can use a SCART/RCA adapter (not included) to connect the RCA plug of the
transmitter and the SCART socket of VCR. Please follow the instruction
figure below.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet (or 120-volt). Use only the adapter
provided.
3.
If your satellite receiver or laser disc player has only one set of A/V output
jacks, in this case, please connect 75ohm RF coaxial cable from satellite
receiver's modulator output port to TV RF input terminal.
4.
Locate and orient the transmitter according to the section of this manual
titled "Orienting Units for Optimum Performance" for best performance of
transmitter.
8
