Step 4. Adjusting the Settings (see fig. 8~10)
Time control
：
Turn the time control knob to”+”
side to increase the illumination time (7 minutes
max.), turn the control knob to “
－
“ side to reduce
the illumination time (30 seconds min.).
Sensitivity control
：
Adjust the detector range of
Passive Infrared Motion Sensor (
±
2M ~ 10M)
Selecting working mode:
Mode 1: Suggested setting when out of
town
- Light + camera : all day detection
- Daytime and nighttime: light, camera are all in operation
Mode 2: Suggested for day to day use
- Light at night + camera all day
- Daytime: light is off, camera is on,
LED indicator
：
for indicating the function status of the unit by different color LED lights.
1)
Red
：
SD card is not inserted into the SD slot or the system is malfunctioning.
2)
Green
：
The unit is recording or USB is inserted and connecting with the computer
3)
LED off: stand by
（
SD card is inserted into the slot
）
, when off/record button is pressed
Please note when off/record button is pressed, remove SD card within 30 seconds (now the LED will
turn red after SD card is removed from the slot)
Reset button
：
restore functions to default settings
1)
Press RESET button once each time you turn on unit.
2)
Please press this button in case of system malfunction.
Fig. 8
Fig. 9
Fig. 10
