Bayco Products, Inc. • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • 1-469-326-9400 • www.nightstick.com
INS-NSR-9944XL-20
Instruction Manual
NSR-9944XL
US PATENT 9,713,217
THANK YOU FOR SELECTING THE NIGHTSTICK NSR-9944XL!
Please read these instructions before using your 9944XL. They include important
safety and operation information. Be sure to charge the 9944XL fully before the fi rst use. A
battery is fully charged when the charger light is green.
WARNINGS
y
Lithium-ion batteries must be used and charged properly. Improper use can result in
serious injury, fi re, or death.
y
NOT FOR USE IN HAZARDOUS LOCATIONS. Do not use this product in explosive
atmospheres, near fl ammable liquids, or where explosion proof or intrinsically safe
lighting is required.
y
DO NOT use this product in the proximity of vehicles or equipment when there is a
risk of fl ammable liquids coming into contact with the fl ashlight.
y
Light can become hot while on. To prevent damage DO NOT cover or place next to
any potentially fl ammable materials while in use.
y
Do not leave the battery in direct sunlight or use or store the battery inside cars in
hot weather.
y
Do not expose the battery to water or salt water, or allow the battery to get wet.
y
Do not store the battery with metallic objects that may cause a short circuit.
y
Immediately discontinue use of the battery if the battery emits an unusual smell,
feels hot, changes color, changes shape or appears abnormal in any way.
y
Keep out of the reach of children.
INITIAL USE
Fully charge the 9944XL before the fi rst use, or if the battery is new or has been
unused for several months. The maximum charge time required is approximately 6 hours.
DAILY USE
y
Use only the supplied Nightstick charger, battery and AC or DC adapter. For best
performance, charge the 9944XL when the fl ashlight beam starts to dim.
y
Connect the AC power adapter to the charger. The LED indicator will not be
illuminated at this point.
y
With the fl ashlight facing forward, snap the 9944XL into the charger until the contacts
snap into place.
y
The LED indicator changes to constant red indicating the 9944XL is properly inserted
into the charger and is in fact charging. The LED indicator remains red until the battery
is fully charged. At full charge, the LED indicator turns green.
y
The total time to full charge the 9944XL varies depending on the remaining charge
in the battery pack.
y
To confi rm a full charge, keep the 9944XL in the charger and turn it on. The LED
indicator will change to red. Turn off the 9944XL. If the 9944XL is fully charged, the
LED indicator will turn green. If not, it remains red until the charge is completed and the
LED indicator turns green. The 9944XL will now be fully charged.
OPERATION
The 9944XL has seven light modes: momentary fl ashlight, full brightness fl ashlight,
medium brightness fl ashlight, low brightness fl ashlight, fl oodlight, dual-light and strobe.
The 9944XL has two body switches and a tail-cap switch providing access to all modes.
Momentary Flashlight Mode
Lightly press the top body switch or the tail-cap switch for momentary operation.
Release the switch to turn the light off.
Constant-on
Press the top body switch or the tail-cap switch until it clicks and then release for
constant-on in high-brightness mode. Press and release either switch to turn the light off.
Select Brightness Level
Press and hold down the top body switch or the tail-cap switch. The light will cycle
from high to medium to low and then back up again at a rate of approximately one mode
per second. The light will continue to cycle up and down through the various modes as
long as the switch is held down. When the desired brightness level is reached, simply
release the switch, and the light will remain in that brightness mode. Press and release
either switch to turn the light off.
Floodlight
Press the bottom body switch until it clicks and then release for fl oodlight mode.
Press and release the bottom body switch again to turn the light off.
Dual-Light
Dual-Light allows the user to turn on both the Flashlight (at any brightness level)
and the Floodlight, at the same time. First select the appropriate brightness level of
the fl ashlight using the directions above. Next press and release the bottom switch to
activate the fl oodlight. Both the Flashlight and the Floodlight are now running. Press
and release both the top/tail-cap and bottom body switches to turn the light off.
Strobe Function
From off or any mode, rapidly double click the top body switch or the tail-cap switch
to activate the strobe function running at full brightness. Press and release either switch
to turn the light off.
Strobe Warning
Exposure to strobing lights may cause dizziness, disorientation, and nausea. A very
small percentage of people suffer from photosensitive epilepsy and may experience
seizures or blackouts triggered by strobing lights. For more information from the
EPILEPSY FOUNDATION about photosensitivity and seizures, please visit
www.
epilepsy.com
. Anyone who has had symptoms linked to this condition should consult a
doctor before using this product.
WARRANTY
LIMITED LIFETIME WARRANTY
Bayco Products, Inc. warrants this product to be free from defects in workmanship
and materials for the original purchaser’s lifetime. The Limited Lifetime Warranty
includes the LEDs, housing and lenses. Rechargeable batteries, chargers, switches,
electronics and included accessories are warranted for a period of two years with proof
of purchase. Normal wear and failures which are caused by accidents, misuse, abuse,
faulty installation and lightning damage are excluded.
We will repair or replace this product should we determine it to be defective. This
is the only warranty, expressed or implied, including any warranty of merchantability or
fi tness for a particular purpose.
For a complete copy of the warranty, go to www.baycoproducts.com/bayco-product-
support/warranties. Retain your receipt for proof of purchase.
Included in the box - Compris dans la boîte - Incluido en la caja
