NIFTYLIFT SD210 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 46

NIFTYLIFT SD210 Series Скачать руководство пользователя страница 5

SD210 Series

Operating & Safety Instructions

English / USA – 07/11

Issue 06

3

1.2

SCOPE

These operating instructions contain all the necessary information required to allow the safe operation
of any Niftylift SD210 4x4x4 (SD64 4x4x4 in the USA), powered by a diesel (D) engine.

For further technical information, circuit diagrams and specific instructions for all maintenance which
may need to be carried out by specialist trained personnel, see the associated Workshop and Parts
manual for your model of Niftylift Self-Drive.

1.3

INTRODUCING THE NIFTYLIFT SELF-DRIVE (SD) SERIES

Please note at the time of going to press all information, illustrations, details and descriptions contained
herein are valid. Niftylift reserves the right to change, alter, modify or improve its products without any
obligations to install them on previously manufactured machines.

If, after reading this manual you require further information, please do not hesitate to contact us at your
nearest office.

Niftylift Ltd, Fingle Drive, Stonebridge, Milton Keynes MK13 0ER, Great Britain
Tel: +44 (0) 1908 223456

Fax: +44 (0) 1908 312733

Niftylift Inc, 32 Concourse Way, Greer, SC 29651 USA
Tel: +01 864 968 8881

Fax: +01 864 968 8836

Nifty Pty Ltd, 11 Kennington Drive, Tomago, NSW 2322, Australia
Tel: +61 (0) 2 4964 9765

Fax: +61 (0) 2 4964 9714

Driven from the platform, the Niftylift SD210 4x4x4 (SD64 4x4x4) is an extremely versatile articulated
boom platform of unique and simple design. It is capable of placing two men and their tools up to a
working height of 21.2m (69ft 7in) or an outreach (past stabilisers) of 9.8m (32ft 2in).

High traction or ground sensitive pneumatic tyres and powerful hydraulic wheel motors give
unsurpassed performance with the option of fast drive speed when the booms are in the drive position.
High drive isolation and audible alarms activated by a ten-degree tilt sensor help to prevent the operator
from working on unsafe terrain whilst driving using the high-drive function.

The Niftylift SD210 4x4x4 provides a fast, safe, cost effective method of access, both inside and out,
for a multitude of applications where overhead working is required

Models include the following:

D: - DIESEL

«
...
3
4
5
6
7
...
»

Содержание SD210 Series















































Отзывы:

Нет отзывов