BA
W
-ALS 50X35_50X55 01/20 GB
INTeNDeD USe
Niedax GmbH & Co. KG -
Asbacher Straße 141 - D-53545 Linz/Rhein
Tel.: +49 (0 26 44) 56 06-0 - fax: +49 (0 26 44) 56 06-13 - [email protected] - www.niedax.de
The notching tool is to be used exclusively to notch (punch) the side walls (Figure 01.1,
Figure 01.2) of a surface metal raceway (LLK …/LUK …) as well as the industrial surface
metal raceway (LUE …/LI …) by the Niedax GmbH & Co. KG, made out of steel or stainless
steel.
• Notching tool
W-ALS 50X35
(Figure 01.1) allows a notch of
50 x 35 mm
;
Of a surface metal raceway (LLK …/LUK …) with a height of
40 mm
(Length of the notch: 50 mm; height -: 35 mm)
• Notching tool
W-ALS 50X55
(Figure 01.2) allows a notch of
50 x 55 mm
;
Of a surface metal raceway (LLK …/LUK …) and the industrial surface metal raceway
(LUE …/LI …) from a height of
60 mm
(Length of the notch: 50 mm; height -: 55 mm)
Larger notches, by moving the tool back or forth, are at any time possible. For this purpose
an additional hydraulic drive (basic unit) is required. The hand hydraulic W-HHA 360-3 can be
ordered from Niedax GmbH & Co. KG and can be used together with the notching tool.
2
/8
TeCHNICAL DATA
Model no.
W-ALS 50X35
W-ALS 50X55
Dimensions tool
(Length x Width x Depth)
162 x 72 x 80 mm
162 x 72 x 100 mm
Dimensions of notch
(Length x Height)
50 x 35 mm
50 x 55 mm
Weight of tool
2,4 kg
2,7 kg
Connection thread
UNF 19
required punching force of basic unit (hy-
draulic)
65 to 85 kN
Required stroke of basic unit
19 to 23 mm
Toolbox dimensions
(Length x Width x Depth)
230 x 275 x 83 mm
Toolbox weight
0,7 kg
figure 01.2
figure 01.1
