Nieco JF93G Gas BroilVection, Руководство пользователя

Страница: 29 / 44

29 Nieco Corporation - Model JF93G
1. Scrape each shaft of both belts on the
discharge end with the wide end of the shaft
cleaning tool. The tool is located on the clip on the
discharge end of the broiler.
2. Wipe shaft cleaning tool with a towel.
Chain Shafts
Discharge End
Tools
Instructions
Clean: Daily
Shaft Cleaning
Tool
BELT ADJUSTMENT
As Needed
Tools
Instructions
1. Remove the Rear Heat Shield, Return
Slide and Stripper Blade.
2. Loosen 7/16” adjusting bolts.
3. Use a large screwdriver to pry down
on the crossbar to remove excess slack
from belt.
4. Tighten 7/16” adjusting bolts.
Inner Shields
Tools
Instructions
1. Use Shaft cleaning tool to reach between
the belt and scrape deposit from inner shield.
Clean: Monthly