27
Nieco Corporation - Model JF93G
1. Disassemble and clean the pilot orifices.
Pilot Orifices
Interior
Tools
Instructions
Clean: Monthly
Flat Head
Screwdriver
1. Remove the left side control box cover.
2. Remove the ceramic boot from the back of the
flame sensor.
3. Loosen the wing nut holding the flame sensor
in place.
4. Remove the flame sensor and clean the metal
tip with a DRY, clean scrub pad.
Flame Sensor
Side
Tools
Instructions
Clean: Monthly
Scrub Pad
Содержание JF93G Gas BroilVection
Страница 2: ...This page intentionaly left blank...
Страница 42: ...42 Nieco Corporation Model JF93G...