13
WEEKLY CLEANING
In addition to the daily cleaning, perform these
steps on a weekly basis.
1. Remove the Upper Burners
1
and clean as following the steps outlined
below (see A,B & C).
2. Clean all Pilot Burners and Main Burner
Orifices with rubbing alcohol and a
pipe cleaner.
3. Remove all grease and carbonized build-up
from the interior of the broiler. Do not spray
anything (i.e. oven cleaner) inside the broiler.
REPLACE REVERBERATOR AT
THE FIRST SIGN OF BREAKAGE.
A. Remove Reverberator and clean
with a stiff bristle brush.
DO NOT SOAK OR SUBMERGE THE BURNERS IN WATER. WATER CAN CAUSE IMPROPER BURNER
PERFORMANCE.
B. Clean Burner Screen with a stiff
bristle brush.
HOLD BURNER WITH THE SCREEN
FACING DOWN WHILE BRUSHING.
This prevents particles from dropping
down and lodging inside the burner.
C. Clean Burner Venturi with a stiff
bristle brush.
HOLD BURNERS SO THAT PARTI-
CLES WILL NOT DROP INSIDE.
Содержание 930 GAS
