Nicotra Gebhardt FAN Commander 200, Руководство по эксплуатации

Страница: 16 / 24

Operating Manual “FAN Commander 200” ECE 03-0200-5E-MG Seite 16 von 24
5 Working with the FC 200
5.1 Software
Display
Scan Line Network scan to find all connected devices with the
chosen protocol
Single Monitor Cyclic scan of single device and monitoring of
requested data
Single Control
Control of a single addressable device with feedback
Group Control
Control of all fans assigned to one of 20 speed control
groups
Broadcast
Control / Parameterizing of all connected devices
without feedback (broadcast)
Group Building
up to 20 groups (free definition) for simple speed control and
up to 2 groups for closed loop control mode
Internal PI-Controllers (2) two separate closed loop control circuits
free programmable as temperature, velocity, pressure and %
fixed assigned sensor signal inputs (1/2) and digital inputs
(1/2) to each closed loop control group (1/2)
Error Output as error indication signal and free configurable signal outputs
(high/low active) maximum 60V – 500mA
Error 1
 red
for acknowledged, but still existing faults
Error 2  red alternating
for new, unacknowledged faults
Operating Levels
3 operating levels (Monitor / Operator / Administrator)
Timer Programmable Scheduler for set-point shift of single fans and
assigned groups