Nicols PARLED 1412 FC IP, Руководство пользователя

Страница: 13 / 14

DMX 512 Configuration
DMX512connections
1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable.
2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin
2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.
3. Connect the unit together in a `daisy chain` by XLR plug from the output of the unit to the input of the next unit.
The cable can not branched or split to a `Y` cable. DMX 512 is a very high-speed signal. Inadequate or damaged
cables, soldered joints or corroded connectors can easily distort the signal and shut down the system.
Channel Function Value Description
1 Dimmer 0-255 0-255
2 Red 0-255 0-255
3 Green 0-255 0-255
4 Blue 0-255 0-255
5 White 0-255 0-255
6 Dimming speed 0-255
Dimming speed from fast to
slow
7 Strobe 0-255 Strobe effect from slow to fast
8 Auto Mode
0-99 Color macro
100-119 3 colors change
120-139 7 colors change
140-159 7 colors change smoothly
160-179 Colors fade strobe
180-199 7 colors strobe 1
200-219 7 colors strobe 2
220-240 Color jump change
241-255 No function
9 Auto Speed 0-255 Auto speed from slow to fast