Nicols BP 7R, Руководство пользователя

Страница: 3 / 10

3
Technical parameters:

Lamp: OSRAM P-VIP 230 lamp

Channel mode: 16,17 , 20CH.

Level scanning: 540 ° (16bit precision scan) electronic error correction.

Vertical scanning: 250 ° (16bit precision scan) electronic error correction.

Color Wheel: 14 colors with white, with rotating rainbow effect.

Gobo Wheel: 17 fixed gobos +open

Shut: up to 13 times per second with automatic pulse effect.

Dimmer: 0%-100% linear dimmer.

Focus: 5 meters to infinity.

Prism: 8 or 16 prisms optional

Frost: 0%-100% linear frost.

Control table reset function and lamp.

Control table switch bubble function (Switch on or off bulb can choose when with
power.
Closed light half-power function.

Power supply: AC110V-240V, 50/60HZ.
The light body size: 405 x 371 x 530mm
Signal connection:
The connection of lights and the connection of light and controller must used two core
shielding wire with its diameter not less than 0.5 mm. We should pay special attention that
the connection of three core of XLR plugs and socket cannot contact with inner shell and
between core and core also cannot contact.
When use XLR-XLR control line, connect the DMX outlet of controller with the DMX input of
the first machine, and connect the DMX outlet of the first machine with DMX input the
second machine. Repeating the process until all machines connected. At last connect the
loop plug with the last lamp’s signal output the connection of controller mode is completed.
This menu of control display board specifically designs for the various types of moving light
equipped with various function control mode, operate easy. For some operation that some
type of light without it is invalid corresponding menu options setting.