●
Three buttons to rename the live edit, set the live edit to
Flash
mode, and
Lock
the live edit which preserves the state when changing presets (useful for
Parking
channels).
●
The currently visible Group and Page to the bottom right.
Encoder actions:
●
Pushing the first encoder will reset the selected fixtures, removing all live edit
values from the fixtures. Moving the encoder determines whether to reset the
selected fixtures or all fixtures. Upon resetting the fixtures, the white dots will
disappear.
●
Moving the third encoder filters the displayed fixtures in the grid by group.
Pushing the encoder selects or deselects all fixtures within the group.
●
If there are more than 16 fixtures within the current group. Moving the fourth
encoder navigates through between the pages of fixtures.
Other actions:
●
Tapping the buttons in the grid selects and deselects the fixtures. When a
fixture is selected, the corresponding channels will be shown on the
Value
screen. If 2 or more fixtures of the same
Fixture Type
are selected, their
channels will be merged and controlled together on the
Value
screen.
●
Tapping the rename button will show the keyboard screen allowing for the
name of the live edit to be changed.
●
Tapping the
Flash
button will enable or disable the live edit’s
Flash
property.
When the
Flash
property is set, the Matrix button will turn white and the edit
will be enabled on pressed and disabled on release.
●
When editing a Live Edit, tapping the flashing Matrix button stores the new Live
Edit and closes the editor. Tapping any other button cancels the change.
Live Edit editor - values
Displayed data:
●
A grid of 16 channel buttons, each displaying the channel name and the current
live edit value if one has been set.
●
The value of the selected channels is displayed to the bottom left.
Encoder actions:
●
Moving the first encoder changes the selected channel value. Tapping the
encoder will show a grid of all Features related to the selected channel.
●
Pushing the second encoder will reset the selected channel, removing the live
edit value from the channel.
Other actions:
●
Tapping a button in the grid selects a channel.
●
Tapping the REC DMX button to the top right records the current DMX output
frame and applies it to the selected fixtures.
30
