7)
To disable the touch and lock the temperature setting,
press the padlock button for 2-3 seconds. Repeat to
unlock.
8)
Separate a section of hair approximately 5cm in width
and smooth it out with a brush.
9)
Place the chosen section of hair between the plates of
your straightener and close the plates. Take care not to
touch the plates which are very hot with your fingertips.
Hold the straightener in place until the section of hair is
fully heated. This will be almost instantaneous.
10)
Once your hair is heated, carefully slide the plates in one
smooth movement all the way down to the ends of your
hair whilst holding it taut.
11)
Keep the section of hair smooth whilst you work in
order to avoid ridges and kinks.
12)
Switch off and unplug your straightener immediately
after use. Always allow your straightener to completely
cool down on a heat proof mat before storing.
